BTS640S2GATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2003 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 85W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | BTS640S2 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 11.4A |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Power Dissipation | 85W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 34V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 19A |
| Rds On (Typ) | 27m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Width | 9.25mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS640S2GATMA1 Overview
As you can see, it's packaged in the way of a Cut Tape (CT).It is included with the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package as well.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.The BTS640S2 family consists of this type.There are 6 terminations in it.During operation, the 7 pins are used.It contains 1 functions.As a result, the maximum output current is reduced to 11.4A in order to meet the operation requirements.Using a voltage of 12V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.4 pins are connected to it in total.This electrical component is included in the PROFET? series.When this is the case, the output current is set to 4A.In order to operate normally, the supply voltage (Vsup) must be maintained above 5V.
BTS640S2GATMA1 Features
Supplied from 12V
BTS640S2GATMA1 Applications
There are a lot of Infineon Technologies BTS640S2GATMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- Gaming
- Handheld Devices
- USB3.1 Power Delivery
- Portable Video Game Players
- Various applications equipped with buttons
- Telecom and Network Systems
- Wireless Headsets
- Storage (HDDs, SSDs)
- Notebook PC