BTM7751GXUMA1
| Parameters | |
|---|---|
| Published | 2008 |
| Series | TrilithIC™ |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Applications | DC Motors, General Purpose |
| Technology | DMOS |
| Voltage - Supply | 1.8V~42V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTM7751 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Interface | Logic |
| Nominal Supply Current | 4.3mA |
| Output Configuration | Half Bridge (2) |
| Halogen Free | Halogen Free |
| Voltage - Load | 1.8V~42V |
| Fault Protection | Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 180 µs |
| Output Peak Current Limit-Nom | 22A |
| Rds On (Typ) | 45m Ω LS, 70m Ω HS |
| Turn Off Time | 180 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Current - Peak Output | 14A |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 18.1mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 27 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
BTM7751GXUMA1 Overview
For packaging, it is used with Tape & Reel (TR).H bridge is provided in the 28-SOIC (0.295, 7.50mm Width) package for the sake of cost savings.Improved reliabilbridge drivery can be ensured based on the supply voltage of 1.8V~42V.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge works normally at -40°C~150°C TJ's operating temperature.H bridge motor driver has many applications, including DC Motors, General Purpose.On PCBs, Surface Mount mounts H gate.Status Flag is one of full bridges specific characteristics.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 28 terminations are employed.28 pins is used as pronged contacts as H bridge ic of a signal interface.Its base H bridge ic number, BTM7751, can be used to locate other H bridge ics that are related.A voltage of 12V is used as the supply voltage.Basically, it is an electronic H-bridge that belongs to the TrilithIC? series.The maximum amount of current which output reaches 14A.It is made up of two 28 pins that work together to perform the specific functions of this bridge driver.The Hbridge is equipped with 4 outputs.
BTM7751GXUMA1 Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BTM7751
Subcategory: 14A
BTM7751GXUMA1 Applications
There are a lot of Infineon Technologies BTM7751GXUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- High current, low profile DC-DC converters
- PC peripherals
- Optical disc drives
- Notebook Computers
- Voltage Regulators
- Compact Blade Servers
- Workstations
- Networking Microprocessor Voltage Regulators
- DVD players
- High-Current DC-DC Point-of-Load Converters