AD834AQ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | AD834 |
| Function | Analog Multiplier |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 35mA |
| Output Current | 4mA |
| Number of Bits | 4 |
| Accuracy | 2 % |
| Max Input Voltage | 1V |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 9V |
| -3db Bandwidth | 500MHz |
| Max Frequency | 500MHz |
| Min Dual Supply Voltage | 4V |
| High Level Output Current | 4mA |
| Dual Supply Voltage | 5V |
| Low Level Output Current | 4mA |
| Positive Input Voltage-Max | 1V |
| Number of Bits/Stages | 4-Quadrant |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD834AQ Overview
Packing materials Tube are used.It is embedded in the 8-CDIP (0.300, 7.62mm) package for cost-effectiveness.There is a considerable amount of use of 4-Quadrant bits per stage.It operates at a voltage of 5V.This device is supplied with a nominally negative voltage of -5V.Radio-frequency signals modulated in the frequency range of 500MHz occupy the range of 500MHz.Several 8 terminations are available to ensure that signals do not reflect off the end of the transmission line.Electronic parts with a number of similarities can be found under its base part number AD834.A 8-pin electronic component is well known for its superior quality and performance in the industry.Electronics that fall under the subcategory Analog Computational Functions are included in this device.A PCB is mounted by the way of Through Hole.It is recommended that the device operate at a temperature of 85°C.A minimum operating temperature of -40°C should be maintained for the electronic device.As a result, it is ideal for a supply voltage of 35mA.A voltage higher than 4V should be used for the dual supply.It is recommended to use dual supply voltages less than 9V.A modulated radio-frequency signal falls within the frequency range of 500MHz.The device is capable of supporting the maximum voltage input of 1V, which allows designers to take full advantage of its flexibility.It operates with the dual supply voltage of 5V.Information can be stored in 4 bits.In order for it to operate, it must be supplied with a voltage of 9V.A number of 1 elements are incorporated into the design.In order to prevent failures, the frequency should not exceed 500MHz.A voltage-dependent control can be applied to the output current 4mA.
AD834AQ Features
Supplied in the 8-CDIP (0.300, 7.62mm) package
Bandwidth of 500MHz
Operating supply current of 35mA
Operating supply voltage of 9V
AD834AQ Applications
There are a lot of Analog Devices Inc. AD834AQ Analog Multipliers & Dividers applications.
- pH (acidity)
- Blood pressure sensors
- Broadcasting
- Signal transformation
- Car stereo
- Digital cameras
- Inverse/same-phase proportional circuit
- High-frequency data acquisition systems
- Biopotential
- Industrial applications including automation