AD8240YRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Frequency | 500Hz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8240 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Max Supply Voltage | 27V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 360μA |
| Output Current | 500mA |
| Max Supply Current | 360μA |
| Max Output Voltage | 27V |
| Voltage - Output | 12V |
| Min Input Voltage | 9V |
| Max Input Voltage | 27V |
| Internal Switch(s) | No |
| Dimming | PWM |
| Number of Segments | 6 |
| Switching Frequency | 500Hz |
| Multiplexed Display Capability | NO |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8240YRMZ Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package conserves board space. For the design of these LED drivers, 1 outputs are used.Surface Mount is used for mounting.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -40°C~125°C TA.Automotive benefits significantly from the program.In this case, the frequency is 500Hz.In this case, it uses 8 terminations.This LED driver is configured with a base of 8 pins.There are 6 segments.It has been mounted on Surface Mount.It is under the base part number AD8240 that you can find this LED driver.It is acceptable to supply voltages of 27V.A voltage output of 12V is provided by this device.On it, there are 8 pins.As a result of its characteristics, it is also classified as Display Drivers.This device operates with a minimum input voltage of 9V volts.The maximum efficiency can be achieved by operating it at a minimal voltage of 9V.In terms of supply current, 27V is the maximum value.If the maximum supply current is less than 360μA, the device is capable of providing high efficiency.The current that can be supplied to the load is 500mA.This electronic component can fully perform when the switching frequency is 500Hz.When operating at the maximum output current of 500mA, it is capable of providing all the benefits associated with LED drivers.It is important to keep the output voltage below 27V.
AD8240YRMZ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 500Hz
Supply voltage of 13.5V
Switching frequency of 500Hz
AD8240YRMZ Applications
There are a lot of Analog Devices Inc. AD8240YRMZ LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- A- lamps
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Architectural lighting
- Down lights
- Industrial LED Lighting: Image Recognition Devices
- LED Lighting PFCs, Linear Dimmable
- High-end retail lighting