AD7893SQ-10
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 45mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD7893 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Polarity | Bipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | 2-Wire, SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 45mW |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Min Input Voltage | 2.375V |
| Architecture | SAR |
| Max Input Voltage | 2.625V |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 117 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 117k |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Power Consumption | 25mW |
| Linearity Error-Max (EL) | 0.0244% |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 70 dB |
| Differential Nonlinearity | 1 LSB |
| Conversion Time-Max | 6μs |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD7893SQ-10 Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 8-CDIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -55°C~125°C.The number of samples of audio recorded every second is 117k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7893 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Single.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 45mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 45mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 2.625V.The digital converter supports the minimal input voltage of 2.375V.The output it is configured with uses TTL.
AD7893SQ-10 Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 4.75V
5V power supplies
AD7893SQ-10 Applications
There are a lot of Analog Devices Inc. AD7893SQ-10 ADC applications.
- Digital beam-forming systems for ultrasound
- Smart antenna systems
- TD-SCDMA, WiMAX
- Transducer
- CMOS Image sensors for mobile applications
- Rotary encoder
- In-building wireless telephony
- Music reproduction technology
- Battery Operated Systems
- Wireless local loop