74VHC174TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 120MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 5.5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC174TTR Overview
In the form of 16-TSSOP (0.173, 4.40mm Width), it has been packaged. D flip flop is embedded in the Cut Tape (CT) package. T flip flop uses Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74VHC series. Its output frequency should not exceed 120MHz. The element count is 1 . During its operation, it consumes 4μA quiescent energy. There have been 16 terminations. The 74VHC174 family contains it. Power is provided by a 3.3V supply. JK flip flop input capacitance is 6pF farads. It belongs to the family of electronic devices known as AHC/VHC. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. There are 6bits in this flip flop. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Its flexibility is enhanced by 7 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 2/5.5V. There are 6 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74VHC174TTR Features
Cut Tape (CT) package
74VHC series
16 pins
6 Bits
2/5.5V power supplies
74VHC174TTR Applications
There are a lot of STMicroelectronics 74VHC174TTR Flip Flops applications.
- Data storage
- Consumer
- Load Control
- QML qualified product
- Bounce elimination switch
- Computers
- Asynchronous counter
- Computing
- High Performance Logic for test systems
- Common Clocks