74LVTH18511DGGRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 64 |
| Weight | 259.993477mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVTH18511 |
| Pin Count | 64 |
| Number of Outputs | 19 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 18 |
| Propagation Delay | 6.8 ns |
| Family | LVT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Height Seated (Max) | 1.2mm |
| Length | 17mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH18511DGGRG4 Overview
There is an embedded version of it in the 64-TFSOP (0.240, 6.10mm Width) package. Tape & Reel (TR) is the way it is packaged. A 18-Bit circuit is used for achieving its superior flexibility as a result of its use of 18-Bit circuits. This electrical device is of the Universal Bus Transceiver logic type. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. Over -40°C~85°C, the operating temperature should be higher. Due to its high and low output current options, 32mA 64mA's maximum level of flexibility is achieved when it comes to designing its features. An FPGA of this type belongs to the series 74LVTH and belongs to the category of FPGAs. It operates at a voltage of 2.7V~3.6V. It belongs to the 74LVTH18511 family. Transmission lines can be terminated with 64 terminations by using a device that matches the characteristic impedance. Normal operation requires an output voltage above 3.3V. This device is equipped with 64 pins. This electronic part is designed with 18 Bits. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. 64 pins are used in the design of this board. It is a member of the LVT family of electronic devices. Upon reaching 3.6V, the supply voltage (Vsup) reaches its maximum value. It is recommended that the supply voltage (Vsup) be greater than 2.7V. In the configuration, it uses the trigger POSITIVE EDGE to trigger the event. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design. In terms of design flexibility, 32mA features a high output current. Supply voltage 3.3V is used by this electrical part. The device has 19 outputs configured.
74LVTH18511DGGRG4 Features
64-TFSOP (0.240, 6.10mm Width) package
74LVTH series
74LVTH18511 family
64 pin count
64 pins
19 outputs
74LVTH18511DGGRG4 Applications
There are a lot of Texas Instruments 74LVTH18511DGGRG4 Universal Bus Functions applications.
- Solar energy generation
- Electricity for military and civilian life in areas without electricity
- Digital watch
- Troubleshooting & Judgment
- Networking
- Agriculture and light complementary power station
- DVD
- Test and Measurement
- VCR
- Digital camera