74ABT16373BDGG,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT16373 |
| Pin Count | 48 |
| JESD-30 Code | R-PDSO-G48 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | ABT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 4.4 ns |
| Independent Circuits | 2 |
| Delay Time - Propagation | 2ns |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ABT16373BDGG,112 Overview
There is an embedded version of it in package 48-TFSOP (0.240, 6.10mm Width). A package of Tube has been used. In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. It operates at -40°C~85°C degrees Celsius. The 74ABT series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74ABT16373 family, it falls under that category. The device is operated when the supply voltage is set to 5V. It has 48 pins that makes it easy to use. ABT is the family name of this electronic device. This device has a total of 2 ports. The part is in the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 5.5V. There is 5V power supply for it. (Vsup) should be greater than 4.5V.
74ABT16373BDGG,112 Features
48-TFSOP (0.240, 6.10mm Width) package
74ABT series
8 Bits
74ABT16373 family
48 pin count
5V power supplies
74ABT16373BDGG,112 Applications
There are a lot of NXP USA Inc. 74ABT16373BDGG,112 Latches applications.
- Shift left with parallel loading
- Relay replacement
- Automotive Body Electronics
- Counter control
- Buffer Storage
- Buffer/Storage Registers
- PCs and Notebooks
- Hammer Device Information
- Display driver
- Shift register